
A woven fabric reinforced polyester resin bearing is available in three forms, cut rings, spiral lengths and flat coils, and is compatible with a wide range of fluids, and is used extensively in mining applications.
The Hallite bearing strip is manufactured by a patented process, using a woven fabric reinforced polyester resin material, and is proven to be compatible with a wide range of fluids including: mineral oils, water-based fluids, and phosphate esters. The construction of the bearing strip incorporates micro-indentations on the surface to trap fluid and provide built-in lubrication to the bearing.
GUIDE RING FEATURES
· Prevents metal to metal contact.
· Guides piston and rod in hydraulic cylinder.
· High load bearing strength.
· Reacts to side load force.
· Damping of mechanical vibrations.
Size Range:-
Guide Rings are available in thickness of 1.5, 2, 2.5, 3 & 4 mm in Thickness & Continuous length up to 15 Meters.
Width Range in mm:-
5.6
6.3
8
10
15
20
25
30
40
![]() |
PRERANA POLYMERS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |